1-100KW cross flow turbine system catalogue pdf
Head：3-11m, flow:40-1100L/s. Output:3-50kW, speed:1000r/min-1500r/min
Cross flow turbine – Advantages
Efficient energy source
It only takes a small amount of flow and a drop as low as 3 meter to generate electricity with micro hydro. Electricity can be delivered as far as a mile away to the
location where it is being used.
Reliable electricity source
Hydro produces a continuous supply of electrical energy in comparison to other small-scale renewable technologies. The peak energy season is during the winter
months when large quantities of electricity are required.
No reservoir required
Microhydro is considered to function as a ‘run-of-river’ system, meaning that the water passing through the generator is directed back into the stream with relatively
little impact on the surrounding ecology.
Cost effective energy solution
Building a small-scale hydro-power system can cost from $500 – $20,000, depending on site electricity requirements and location. Maintenance fees are relatively small in comparison to other technologies.
Selection table
|
Turbine Parts |
|
Turbine Model |
GL760-LM-25 |
GL760-LM-30 |
GL760-LM-35 |
GL760-LM-40 |
GL760-LM-42 |
GL760-LM-60 |
|
Water head range |
6~8 m |
6~8 m |
6~8 m |
6~8 m |
6~8 m |
6~8 m |
|
Water flow range |
0.31-0.5m³/s |
0.26-0.6m³/s |
0.38-0.65m³/s |
0.65-0.8m³/s |
0.82-1.0m³/s |
1.0-1.11m³/s |
|
Output range |
10kW |
15kW |
20kW |
30kW |
40kW |
50kW |
|
Rotary speed |
1000~1500rpm |
1000~1500rpm |
1000~1500rpm |
1000~1500rpm |
1000~1500rpm |
1000~1500rpm |
|
runner type |
cross flow |
cross flow |
cross flow |
cross flow |
cross flow |
cross flow |
|
bearing type |
water-proof |
water-proof |
water-proof |
water-proof |
water-proof |
water-proof |
|
Ruuner diameter |
25cm |
30cm |
35cm |
40cm |
42cm |
60cm |
|
Coupling method |
direct couple |
direct couple |
direct couple |
direct couple |
direct couple |
direct couple |
|
Gross weight |
540 kg |
780 kg |
1020 kg |
1260kg |
1500kg |
1740 kg |
|
Packing size |
1*1*1m |
1.3*1*1m |
1.5*1*1m |
1.3*1.3*1m |
1.5*1.5*1m |
1.5*1.5*1.5m |
|
Generator Parts |
|
Generator Model |
PM-0.6 |
PM-1.0 |
PM-1.5 |
PM-2.0 |
PM-3.0 |
SFW-5.0 |
|
Output power |
10kW |
15kW |
20kW |
30kW |
40kW |
50kW |
|
Rotary speed |
1500 rpm |
1500 rpm |
1500 rpm |
1500 rpm |
1500 rpm |
1500 rpm |
|
Phase |
3-phase |
3-phase |
3-phase |
3-phase |
3-phase |
3-phase |
|
Generator type |
PM |
PM |
PM |
PM |
PM |
excitation |
|
Power factor |
0.8 |
0.8 |
0.8 |
0.8 |
0.8 |
0.8 |
|
Insulation |
F/F |
F/F |
F/F |
F/F |
F/F |
F/F |
|
Protection |
IP23 |
IP23 |
IP23 |
IP23 |
IP23 |
IP23 |
|
Temperature |
(-)30°C~50°C |
(-)30°C~50°C |
(-)30°C~50°C |
(-)30°C~50°C |
(-)30°C~50°C |
(-)30°C~50°C |
|
Humidity |
≤90% |
≤90% |
≤90% |
≤90% |
≤90% |
≤90% |
|
Gross weight |
100kg |
150kg |
200kg |
250kg |
300kg |
350kg |
|
Packing size |
1*1*1m |
1.3*1*1m |
1.5*1*1m |
1.3*1.3*1m |
1.5*1.5*1m |
1.5*1.5*1.5m |
catalogue download
This product was added to our catalog on Wednesday 28 May, 2014.
