Model
|
Continuous Duty(H/125k) |
STAND-BY(H/163k) |
50Hz 1500rpm |
60Hz 1800rpm |
50Hz 1500rpm |
60Hz 1800rpm |
Power(KW)
|
Capacity(KVA)
|
Power(KW)
|
Capacity(KVA)
|
Power(KW)
|
Capacity(KVA)
|
Power(KW)
|
Capacity(KVA)
|
SFW-164A |
6 |
7.5 |
8.2 |
10.2 |
7.2 |
9 |
9 |
11.3 |
SFW-164B |
8.8 |
11.0 |
11 |
13.8 |
9.6 |
12 |
12 |
15.0 |
SFW-164C |
10 |
12.5 |
12 |
15 |
10.8 |
13.5 |
13.2 |
16.5 |
SFW-164D |
12 |
15.0 |
15 |
18 |
13.2 |
16.5 |
16.5 |
20.6 |
SFW-184E |
18 |
22.5 |
22 |
27.5 |
20 |
25 |
24 |
30 |
SFW-184F |
22 |
27.5 |
27 |
33.75 |
24 |
30 |
34.5 |
43.1 |
SFW-184G |
24 |
30.0 |
28 |
35 |
26.4 |
33 |
30.8 |
38.5 |
SFW series brushless three-phase synchronous generator is a new generation AC synchronous generator designed and developed by introducing, digesting and assimilating internationally advanced motor manufacturing technology. The series generator conforms to most international standards and the following standards: IEC34-1 and ISO8528 NEMA. The generator has superior performance, reliable quality and convenient maintenance, and can connect with prime motor through rigid coupling or elastic coupling to serve as lighting and power of small power stations, factories, buildings, construction sites, etc.
Product Features
Steel engine base
Cast iron end cap
Quality carbon steel sheet
Imported ball bearing
Installing form
Single bearing with standard SAE connection and SAE drive piece
Duplex bearing with standard shaft extension and flange connection end cap
Electrical Performance
The generator adopts brushless excitation. Insulation class: H; protection grade: IP21; steady state voltage regulation frequency≤±1%; transient voltage regulation rate +20%.-15% (60%In. cosΦ≤0.4 lag); line voltage waveform sine distortion factor≤5%; voltage setting range≥±10%UN; environmental conditions: ambient air temperature≤±40℃; altitude≤1000m; relative air humidity≤90%.
catalogue download
This product was added to our catalog on Tuesday 03 June, 2014.